Wirtgen W 220 Fi and W 250 Fi Large Milling Machines Premiere at CONEXPO 2020

The new W 220 Fi and W 250 Fi large milling machines serve a wide range of applications at a maximum milling depth of 14 in. making them ideal for surface course rehabilitation and fine milling work to complete removal of the surface.

• Various drive concepts are available to ensure maximum, optimal milling performance

• With an engine power of 801 hp (W 220 Fi) and 1,010 hp (W 250 Fi) respectively, the two flagship models are exceptionally powerful

• In automatic mode, the Mill Assist standard assistance system provides the optimal balance between performance and operating costs. This not only improves milling performance, but also reduces diesel, water, and pick consumption, as well as CO2 emissions

• Operator can preselect a working strategy from “Cost-optimized”, “Performance-optimized” or “Milling texture quality”. For example, it is possible to define the required milling texture quality on a scale of 1 (coarse) to 10 (very fine) in advance at the touch of a button

• Mill Assist automatically controls the two-speed Dual Shift powershift transmission. In combination with the diesel engine, the milling drum speeds can be increased or decreased, making it suitable for a vast range of applications. At lower speeds, fuel and pick wear can be significantly reduced. At higher speeds, high milling pattern quality is ensured even in the case of high area performances

• Wirtgen Performance Tracker (WPT) calculates the precise surface milling performance, milling volume and consumption values for the machine. All important performance and consumption data is displayed on the operator’s platform in real time for the milling machine operator and are also sent to the machine operator by e-mail in an automatically generated report immediately after completion of the milling work