VÖGELE MT 3000-2i Material Transfer Vehicle

The newly designed MT 3000-2i material transfer vehicle from Vögele weighs 56,000 lbs., with 18-ton storage capacity, and offers a low profile.

• Can move 1,300 tph 
• Active remixing is achieved by two 16-in. diameter conical augers in receiving hopper
• Both primary and secondary conveyor belts are 43 in. wide and are heated to keep material from sticking and eliminate “warm up” loads
• Secondary conveyor can swing 55 degrees to left or right
• Heated scrapers keep belts constantly clean
• Passive remixing 17- or 22-ton “receiving insert” in paver hopper
• Grate system in the receiving insert breaks up cold crusts as they enter the insert, allowing smaller clumps to absorb heat from the hotter surrounding mix
• Feed system with auto feed function automatically slows or shuts down feeding when the paver hopper insert is filled
• Maximum delivery override switch delivers material at maximum throughput for instant filling of the hopper inser
• Collision bar on the paver insert will halt pavers if they get too close to the MTV
• 215-hp water-cooled Deutz engine is Tier 4-interim emissions-compliant

Brochure: Vögele MT 3000-2i Offset Material Transfer Vehicle

Material Transfer Vehicle Ensures Caltrans Pilot Project Goes Smoothly

[Video] Vögele MT 3000-2i MTV Feeds a Vision 5200-2i Paver on California Highway

[Video] Vögele MT 3000-2i Material Transfer Vehicle in Action