Lincoln Paving 770 Series Windrow Elevator

June 29, 2017

Lincoln Paving Products, Inc.

Picture 063 59556f9342691

The 770 Series is equipped with a 60-in.-wide high-capacity slat conveyor and has a 94-in. discharge height for a full hopper load.

Smooth running, Tier 4 Interim, six-cylinder diesel engine
Two high-torque hydraulic motors drive an upgraded high-demand duty cycle gear reducer on both sides to provide balanced power to the conveyor drive shaft
Drivetrain design transmits 30% more torque to the conveyor flight assembly
Hydraulic telescoping paver attachment for ease of hookup
Increased rear caster frame pivot point angles minimize residual resistance during forward and reverse transitions
Easily operates attachments such as the Pug Mill, Re-mix Auger or Material Modifier, which is used with Rubberized Hot Mix Asphalt

Fill out the form below to request more information about Lincoln Paving 770 Series Windrow Elevator

Aided by labor groups, advocates, and other industry stakeholders’ comments, the Davis-Bacon Act sees the most comprehensive updates in 40 years. What immediate impacts will be felt by the road building and asphalt industry?

Road Construction Wages To Change Under New Labor Rules

Aided by labor groups, advocates, and other industry stakeholders’ comments, the Davis-Bacon Act sees the most comprehensive updates in 40 years. What immediate impacts will be felt by the road building and asphalt industry?

Carryback works against efficiency by reducing payload in the haul truck as residual material is left sticking to the sides and bottom of the truck, decreasing hauling capacity for subsequent loads.

Reducing Equipment Carryback and Improving Hauling Efficiency

Carryback works against efficiency by reducing payload in the haul truck as residual material is left sticking to the sides and bottom of the truck, decreasing hauling capacity for subsequent loads.

Microsoft Teams Image 5ff8ceed06925 61d8a3748764d

Hops & Highways S3 E01: LIVE FROM CONEXPO 2023

Brandon Noel, Editor of Asphalt Contractor Magazine, and Evan Triggs, VP Earthwave Technologies, have a Sierra Nevada pale ale at CONEXPO 2023, and discuss the post COVID construction tech-boom, and some possible futures for the industry.

The TL723 and TL923 telehandlers have redesigned comfort cabs, turbo-charged Tier 4 engines and accessible service points.

Bobcat Releases New Telehandlers

The TL723 and TL923 telehandlers have redesigned comfort cabs, turbo-charged Tier 4 engines and accessible service points.

Weiler E2850 C Working

Weiler E2850C Remixing Transfer Vehicle

Unrivaled Performance from BOMAG Milling Machines

Unrivaled Performance from BOMAG Milling Machines

On your jobsite, if you want performance, ease of operation and operator comfort, then you want the BOMAG BM 2200/65 Milling Machine

[VIDEO] Roadtec SB-3000 Material Transfer Vehicle

The SB-3000 features innovations that were designed to keep contractors safe while also producing a more consistent mat

Roadtec Sb 3000 Shuttle Buggy Mtv Gallery 03

Roadtec Unveils SB-3000 Material Transfer Vehicle at CONEXPO 2020

With 25 tons of storage in the main hopper, the SB-3000 can hold more than 30 tons of material to help maintain nonstop paving and remixing.

Reveal

[VIDEO] Roadtec Debuts New Shuttle Buggy MTV at CONEXPO 2020

Purpose-built and powerful, Roadtec’s SB-3000 is a powerful yet maneuverable Material Transfer Vehicle that provides a quality mat without sacrificing comfort, safety or efficiency.

Roadtec Mtv 1105 Material Transfer Vehicle

Roadtec MTV-1105

With the MTV-1105, you never have to worry about the base—the tracked MTV-1105 can handle it. If the ground is solid enough for paving, the MTV-1105 smoothly and effortlessly carries material anywhere you need.

Maxresdefault 5c6d86c123a7e

[VIDEO] Dynapac MF2500CS Feeder Designed with Operator in Mind

Dynapac North America introduces the MF2500CS feeder to the North American product portfolio featuring two new models, the MF2500CS and the MF2500CS with SwingApp.

Buying? Let Us Help

Buying? Let Us Help

To help you get ahead this season, Dynapac is offering 0% financing on select equipment for 48 months.

Hqdefault 5c64963a79d13

[VIDEO] Weiler Showcases First E2850B Material Transfer Vehicle at World of Asphalt

The new MTV has been updated and simplified to improve contractor operation

To help contractors put asphalt down faster, the use of Material Transfer Vehicles (MTVs) has been increasing as a way to use less trucks while reducing material and thermal segregation

Maintain your MTV for Optimal Performance

Preventative maintenance on a material transfer vehicle can help prevent costly breakdowns

Dynapac Mf2500 Cs Worksite Front Side 04 (pl)

MF2500CS Material Feeder Product Line

Dynapac MF2500CS material transfer vehicle product family can handle a variety of material applications including asphalt, concrete, sand and base material.

Weiler E1250 B Working

Weiler E1250B Remixing Transfer Vehicle

Weiler E2850 A Working

Weiler E2850A Remixing Transfer Vehicle

Dynapac Mf2500 Cs Swing App Front Side

Dynapac MF2500CS Material Transfer Vehicle

Dynapac North America introduces the new MF2500CS material transfer vehicle (MTV) product family featuring two new models, the MF2500CS and the MF2500CS with SwingApp

Roadtec mtv1100 2 58b44507267c9

Roadtec MTV-1100e Material Transfer Vehicle

Roadtec Announces Winter 2017 Technical Training Dates

Roadtec offers comprehensive programs at its Chattanooga headquarters for the asphalt paving and milling trades

A Vogele MT 3000-2i material transfer vehicle was paired with a new Vision 5200-2i paver with VR 600 screed for the successful pilot project on California's S.R. 25, .

Material Transfer Vehicle Ensures Caltrans Pilot Project Goes Smoothly

The combination of the Vogele MT 300-2i material transfer vehicle and Intelligent Compaction delivered average target density of 94% and optimal smoothness on California's S.R. 25.

[Video] Vögele MT 3000-2i Material Transfer Vehicle in Action

[VIDEO] Vögele MT 3000-2i Material Transfer Vehicle in Action

A birds-eye view of the Vögele MT 3000-2i in action on a California highway.

Brochure: Vögele MT 3000-2i Offset Material Transfer Vehicle

The Vögele MT 3000-2i Offset is a powerful, innovative material feeder whose outstanding feature is an uninterrupted, non-contacting material transfer.

Buying? Let Us Help

Buying? Let Us Help

To help you get ahead this season, Dynapac is offering 0% financing on select equipment for 48 months.